ALL PARTS AND KITS FOR OUR TIPPMANN X7 KITS ARE INTERCHANGEABLE BETWEEN THE STANDARD X7 AND THE X7 PHENOM, EXCEPT FOR THE MAGAZINES.
These mods are not crafted from stamped steel, machined aluminum, or injection molded plastics, (except for the M4SIR foregrip) these are individually hand-modified kits and accessories that are modified to-order. We don't make them until you order them.
We guarentee that our mods are suitable for play in regular paintball conditions and if treated properly will last you an extremely long time. However common sense must be used, if you end up taking a face-plant at a full sprint off of a 6ft rock pile, there's a good chance your foregrip is going to break. You can play hard with our mods, but don't play recklessly.
DHallak - Scenario Arms,
x7og.net
Players can now inquire about having any part or kit listed in our "in development" pages made for them. However, you must realize that listed prices will be including the ordering of ALL of the materials required to make your mod for you. For example, if you want a Sig552 foregrip and stock, the cost will include the ordering of an airsoft sig552 for us to mod, as well as 2 X7 foregrip halves, an X7 magwell, and an X7 stock endcap from tippmannparts.com, as well as the shipping for them, plus all of the epoxies and paint. Once the parts arrive, we can then begin making your mod. You are literally paying for the parts required to make your mod, as well as having it all assembled.
Parts Cost: $70
Labor: $40
Final Cost: $110
Special:
Can be used interchangeably with either a standard X7 or an X7 phenom with the use of one of our new adapters.
Parts Cost: $35
Labor: $30
Final Cost: $65
Parts required for this mod:
Tippmann/SO Ump45 Mag, real empty brass bullet casings, epoxies.
Parts Cost: $50
Labor: $15
Final Cost: $65
Parts required for this mod:
Tippmann/SO M16 straight mag, Airsoft G36 visible bullet mag, epoxies.
Parts Cost: $70
Labor: $40
Final Cost: $110
Parts required for this mod:
Stock X7 Foregrip, 2 extra X7 foregrip halves, 4 extra foregrip screws. The cost is the same for a full length foregrip or a SCAR length foregrip, epoxies.
X7 CQB36 Foregrip
Parts Cost: $70
Labor: $30
Final Cost: $100
Parts required for this mod:
Stock X7 Foregrip or 2 foregrip halves, Airsoft Foregrip, epoxies.
Price drops $25 if you provide your own X7 stock foregrip.
X7 Heavy Gunner/Sniper Foregrip
Parts Cost: $80
Labor: $30
Final Cost: $110
Parts required for this mod:
Stock X7 Foregrip or 2 foregrip halves, Airsoft Rifle, epoxies.
Price drops $25 if you provide your own X7 stock foregrip.
Parts Cost: $65
Labor: $45
Final Cost: $110
Parts required for this mod:
Stock X7 backplate, Airsoft Dragunov stock, Epoxies, Oak inserts.
Parts Cost: $60
Labor: $50
Final Cost: $119.95
Parts required for this mod:
Stock X7 backplate
Parts Cost: $220
Labor Cost: $120
Final Cost: $340
Parts required for this mod:
Stock foregrip or 2 foregrip halves, X7 magwell, backplate, Airsoft G36, picattany scope ring mount, 1" picattany sight riser, airsoft visible bullet mag, X7 magwell, Epoxies.
Parts Cost: $300
Labor Cost: $130
Final Cost: $430
Parts required for this mod:
Stock foregrip or 2 foregrip halves, X7 magwell, Airsoft G36 rifle, picattany scope ring mount, 1" picattany sight riser, Airsoft Betamag, X7 M16 short or straight mag, Airsoft G36 carrying handle, epoxies.
Parts Cost: $320
Labor Cost: $150
Final Cost: $470
Parts required for this mod:
Stock foregrip or 2 foregrip halves, stock backplate, X7 ak47 front sight and foregrip, Scenario Arms "Heavy Mag", Airsoft Dragunov rifle, epoxies.
Parts Cost: $270
Labor Cost: $150
Final Cost: $420
Parts required for this mod:
Stock foregrip or 2 foregrip halves, stock backplate, X7 M16 straight mag, picattany scope ring mount, picattany 1" sight riser,
epoxies.
Parts Cost: $150
Labor Cost: $120
Final Cost: $270
Parts required for this mod:
Stock foregrip or 2 foregrip halves, stock backplate, X7 magwell, HK416 rear sight, airsoft 5.56mm bullet mag, epoxies.
The majority of the cost comes from ordering the actual parts to be modded. You will notice that in most cases it is actually more cost effective to have a complete Kit made rather than an individual part. This is due to the majority of parts requiring that an airsoft gun be ordered to get your desired part off of first. Whether you want an SL8 stock, or a complete SL8 kit, we would need to get a complete SL8 airsoft gun to make any of them.
The listed final costs do NOT include the cost of tax/shipping.
If you have a serious inquiry concerning ordering one of our modded kits, please email us at dhallak@scenarioarms.com
REMINDER
If you have ANY of the X7 parts listed in the "required for this mod" description for each kit and would want to let us use them to reduce the final cost of your mod, please include that information in your email inquiry.
Email Inquiries to: dhallak@scenarioarms.com
X7 Low Profile Carrying Handle
Parts Cost: $80
Labor: $40
Final Cost: $120
Parts required for this mod:
Airsoft G36c carrying handle, picattany sight riser, picattany scope riser mount.
X7 Quick Release Carrying Handle
Parts Cost: $100
Labor: $40
Final Cost: $140
Parts required for this mod:
Airsoft G36 carrying handle, picattany sight riser, picattany scope riser mount.
Parts Cost: $50
Labor: $29.95
Final Cost: $79.95
Parts required for this mod:
Airsoft machined aluminum M4SIR Foregrip
Parts Cost: $75
Labor: $50
Final Cost: $129.95
Parts required for this mod:
Airsoft Rifle, X7 Stock Foregrip
Price drops $25 if you provide your own X7 stock foregrip.
Pictured with 10" Barrel
Pictured with 14" Barrel
Pictured with 20" Barrel
Pictured with 14" Barrel
Pictured with 9" Barrel
Parts Cost: $160
Labor Cost: $60
Final Cost: $220
Parts required for this mod:
Tippmann Xp5 Foregrip, Scenario Arms "Heavy Mag", Rear Sight. (Kit does NOT include a Tippmann airthru stock.)
Pictured with 16" Barrel
Parts Cost: $95
Labor: $35
Final Cost: $130
Parts required for this mod:
Airsoft Rifle, Tippmann xp5 foregrip
Price drops $40 if you provide your own X7 xp5 foregrip
Parts Cost: $260
Labor Cost: $120
Final Cost: $380
Parts required for this mod:
Stock Foregrip, X7 Magwell, X7 stock backplate, Airsoft Rifle, Aluminum picattiny scope ring and sight risers, Airsoft Foregrip,
Epoxies.
Pictured with 12" Barrel
CUSTOM PARTS ORDERS - Updated Feb 8.
For those of you who have placed orders for custom parts, kits, or accessories, you can now check on the status and progress of your order at the following link:
Parts Cost: $85
Labor: $35
Final Cost: $119.95
Special:
The SCAR buttstocks can take up to a few
months to get made.
All of our stocks are can be used with either the
X7 or the X7 Phenom
The CQB36, Euro Sniper/Heavy Gunner,and Euro Assault, foregrips need to be modded to work on the Tippmann Phenom
Only our Double Drum Mag, and Phenom 5.56mm Mags are useable on the X7 Phenom
We will be adding buttons to the ordering pages soon so that you can specify if your kit would be for a standard X7, or an X7 phenom,.
Due to the shorter length of the Phenom's body, we will be adding the ability for players to specify whether their carrying handles would be used for an X7 or an X7 Phenom.
